ElectricalSlider

Electrical
Engineers

Fully Qualified and Insured

Domestic - Commercial - Industrial

Testing - Inspections - Certificates

Domestic Electricians and Electrical Contractors

We provide a professional service from qualified electrical engineers and electricians. Call now 01793 324865 or click here to email us now with your requirements.

We are highly experienced professionals that have worked on a wide range of projects. We can help you with anything from simple socket replacements, testing appliances, installing new power points and lighting systems or complete rewiring.

We can also advise you on lighting design and energy saving technology for your home including installations of the latest wireless lighting and heating solutions. We provide security installations including CCTV and intruder alarms.

We understand the trust that you need to invest in your contractor and we are proud of the amount of referrals our customers give us. You can be assured you are dealing with highly trained and qualified professionals and that we’re fully insured for your peace of mind.

electrical3
electrical2
electrical1
Re-Wiring

Full Rewiring

We can provide comprehensive rewiring/refurbishment service to suit your requirements.

We also offer a design service to suit all budgets, along with helpful & practical advice from our experienced engineers so you get the best from your property’s electrical installation.

Boiler System Wiring

From simple, instantaneous & combi-boilers to full pump pressurised systems with heat exchangers. Our combined years of experience and knowledge means that we can confidently install the system of your choice, with a little help from a plumber of course!

Lighting

We know that good lighting design is the key to producing the right atmosphere in either a commercial or residential property.

Our experience & knowledge mean we can both design & advise on the perfect lighting for your project.

Emergency Lighting

We Design, supply, install and Maintain Emergency Lighting systems. We provide routine testing and certification, compliance, reactive fault-finding and Remedial Work.

Fire/Intruder Alarms

European Intruder Alarm Standards

Four Grades of alarm system exist, based on increasing levels of resilience against attack by intruders with anticipated levels of knowledge and tools.

Grade 1: Intruders expected to have little knowledge and limited tools. Alarm is suitable for a low risk
Grade 2: Intruders expected to have limited knowledge and some tools. Alarm is suitable for a low to medium risk
Grade 3: Intruders expected to have knowledge and full range of tools. Alarm is suitable for medium to high risk.
Grade 4: Intruders expected to have sophisticated knowledge and tools. Alarm is suitable for a high risk.

Alarm equipment is marked as being suitable for use at a particular grade. Whilst installers will generally use equipment of the same grade in each system, it may sometimes be appropriate to mix equipment of differing grades, in which case the official Grade of the whole alarm system is that of the lowest graded piece of equipment used with in it.

There is still little alarm equipment available for grade 4 systems and therefore Alarm installers will use some Grade 3 equipment. However Grade 4 signalling equipment is available and should be installed with all alarm systems in medium to high risk premises e.g. Jewellers.

The Association of British Insurers (ABI) stopped insurers as a group deciding the grade of alarms because the Office of Fair Trading (OFT) considered it un-competitive with the result that alarm companies decide the alarm grade for the risk. In their quest for business it’s possible for the installing company to recommend a lower grade alarm. Although in theory grade 2 is for low to medium risk and grade 3 for high risk e.g. jewelers, installers quite often recommend Grade 2 equipment.

Please note that in general it is required by insurers that Jewellers install a grade 3 system with Grade 4 signalling. No matter what grade alarm system is installed, Grade 4 signalling is required.

Grading of Detection and control systems

Apart from increasing control panel event memories and levels of recommended detection, the key difference between Grades 2, 3 and 4 is that movement sensors at Grade 3 must be able to detect masking, i.e. something being placed over the sensor lens. At Grade 4 movement sensors should be able to detect range reduction, i.e. something blocking part of the detectors field of view.

Grading of Signalling Systems

Each signalling Grade has a subset of options showing acceptable combinations of signalling, e.g. an audible siren and/or a link to an Alarm Receiving Centre (ARC).

Those likely to be used in the UK are:-
Grade 2 – Option X Siren at premises
Grade 2 – Option B Siren + Single link to ARC
Grade 2 – Option C Two links to ARC
Grade 2 – Option D Single link to ARC
Grade 3 – Option B Siren + Single link to ARC
Grade 3 – Option C Two links to ARC
Grade 3 – Option D Single link to ARC Grade 4 – Option B/C/D Options as Grade 3 above. The performance of the link to the ARC varies between grades. For example, Grade 2 Option B signalling must enable an ARC to be notified of signalling failure within 25 hours. Grade 3 Option B must notify the ARC of signalling failure within 5 hours. Grade 4 Option B must notify the ARC of signalling failure within 3 minutes.

Recent changes in the Association of Chief Police Officers (ACPO) policy requirements states that the police will respond to a security system activation either as a result of a confirmed activation through a remotely monitored security system i.e. that two separate signalling systems using different signalling paths must be provided if the police are expected to attend a line cut. It is therefore required that dual path signalling is installed.

Grading of maintenance

Maintenance requirements are:-
Grade 2 – Option X 1 site visit Per annum
Grade 2&3 – Option B/C/D 2 visits per annum
OR 1 site visit and 1 remote check
Grade 4 – Option B/C/D 2 site visits per annum

Systems that are designed to generate confirmed alarm conditions are further subject to British Standards Institute document DD 243. These two documents establish minimum standards for alarm systems in buildings (whether commercial or domestic).

They do not however, adequately address all of the features that insurers normally require of an alarm which is intended to protect commercial premises, and it is therefore necessary to give additional specification requirements to alarm installers when purchasing a new system.

Please therefore ensure that you pass a copy of the “Risk Management Guide – Alarm Specification” to your intruder alarm company.

CCTV Installation

We provide and install CCTV systems that can be fully monitored with remote viewing facilities. From individual systems to basic security stand-alone devices.

Landlord Safety Certificates

Our Electrical engineers adhere to Part P building requirements and are accredited and regulated by either the:

We can carry out electrical certificates (electrical installation condition reports), diagnostics and fault finding on electrical systems. Our engineers are fully trained and comply with all current requirements and regulations ensuring that your work is done to optimum standards.

Our electricians use the latest testing equipment to trace faults which enables them to diagnose and repair faults quickly. Once our engineer has carried out the inspection they will provide you with a report detailing any faults and recommendations for remedial works.

01793 324865

Haig Close, Upper Stratton
Swindon - SN2 7QW

Get In Touch

Find out more about how D & G Can help you make sense of Solar Energy and start saving you money

D & G Energy Solutions